INSTRUMENTATION AND BIOMECHANICAL MODEL FOR KINEMATIC AND KINETIC ANALYSIS OF UPPER LIMBS DURING GAIT WITH CRUTCHES

Authors

  • Enrique Pérez-Rizo National Paraplegic Hospital

DOI:

https://doi.org/10.17411/jacces.v3i2.16

Keywords:

biomechanics, biomechanical model, upper extremity, crutch-assisted gait

Abstract

The goal of this study was to develop a three-dimensional kinematic and kinetic model of the right upper extremity and a Lofstrand crutch in order to analyze joint displacements and loads during crutch-assisted gait. A Lofstrand crutch was instrumented with a six-component load cell to measure forces and moments at the crutch tip. The crutch and the right upper extremity of a subject were instrumented with markers to obtain kinematic data. A biomechanical model based on rigid bodies was implemented in biomechanical analysis software. To demonstrate the functionality of the model, a pilot test was conducted on one healthy individual during Lofstrand crutch-assisted gait. The shoulder extended during the support phase and flexed in the swing phase, the elbow flexed during the swing, and the wrist remained in extension throughout the cycle. In the shoulder and elbow joints, the predominant reaction forces were upward, whereas the internal force moments were flexion and extension, respectively. This tool will be useful when it comes to identifying risk factors for joint pathology associated with pattern gait, aid design or crutch overuse.

Author Biography

Enrique Pérez-Rizo, National Paraplegic Hospital

Biomechanics & Technical Aids Developmente & Research Department.Biomechanical Engineer.

Downloads

Additional Files

Published

2013-11-22

How to Cite

Pérez-Rizo, E. (2013). INSTRUMENTATION AND BIOMECHANICAL MODEL FOR KINEMATIC AND KINETIC ANALYSIS OF UPPER LIMBS DURING GAIT WITH CRUTCHES. Journal of Accessibility and Design for All, 3(2), 135–156. https://doi.org/10.17411/jacces.v3i2.16

Issue

Vol. 3 No. 2 (2013): Journal of Accessibility and Design for All

Section

Journal articles

License

Authors who publish with Journal of Accessibility and Design for All agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share or adapt the work with an acknowledgment of the work's authorship and initial publication in this journal. Use of the work for commercial purposes are not allowed.
  2. Authors are able to publish the journal's published version of the work in other media  (e.g., post it to an institutional repository or publish it in a book), as far as they inform the Journal of Accessibility and Design for All of that fact. When publishing their work in other sources, authors must mention the name of the Journal of Accessibility and Design for All, its ISSN, the number and issue in which the article was published and a link to the main page of the Journal of Accessibility and Design for All. Optionally, they can also include a link to the article published in the Journal of Accessibility and Design for All.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website), as it can lead to productive exchanges, as well as earlier and greater citation of published work.